Draft a thermal imaging-enabled punch-list checklist for detecting latent moisture intrusion in cold-storage warehouse envelopes

Cold Storage Envelope Design Files *

Temperature Zone Classification * Select temperature classification Standard Chilled (30-35°F / -1-2°C) Medium Frozen (-10-0°F / -18 to -17°C) Deep Frozen (-40 to -20°F / -40 to -28°C) Ultralow Frozen (below -40°F / -40°C) Controlled Atmosphere (32-36°F / 0-2°C) Blast Freeze Area (-40 to -30°F / -40 to -34°C) Tempering Area (32-45°F / 0-7°C) Mixed Temperature Environment

Building Construction Type * Choose construction assembly type Insulated Metal Panel System (IMP) Precast Concrete with Insulation Steel Frame with Insulated Metal Siding Concrete Tilt-up Wall with Vapor Barrier Air-supported Structure Sandwich Panel Construction Insulated Masonry Block Hybrid Panel/Brick System Structural Insulated Panels (SIP) Modified Shipping Container

Moisture Intrusion Target Areas *

Design Moisture Vapor Transmission Rate * Choose perm rating classification 0.01 perms (Class I Vapor Retarder - Metal Foil) 0.03 perms (Class I - High-density Polyethylene) 0.08 perms (Class I - Laminated Vapor Barrier) 0.1 perms (Class I - EPDM Membrane) 0.3 perms (Class I - Rubberized Asphalt) 0.5 perms (Class III system) 1.0 perm (Semi-permeable) Specify custom perm rating

Thermal Imaging Equipment Parameters * Choose equipment specification Thermal sensitivity: 0.05°C, 320x240 resolution (Standard) Thermal sensitivity: 0.03°C, 640x480 resolution (High-precision) Thermal sensitivity: 0.02°C, 1024x768 resolution (Research-grade) Uncooled microbolometer, 0.1°C sensitivity (Cost-effective) Cooled detector, 0.02°C sensitivity (Laboratory-grade) Mobile FLIR camera with smartphone integration Drone-mounted thermal array (Large areas) Handheld gun camera with laser targeting

Critical Stakeholder Requirements *

Environmental Conditions During Inspection * Choose environmental condition Pre-operational (Empty facility, doors closed 24+ hrs) Fully operational (Working facility with material flow) Seasonal temperature differential: 40+ °F (22+ °C) Moderate differential: 20-40 °F (11-22 °C) Minimal differential: Under 20 °F (11 °C) High humidity conditions (>80% RH) Low humidity conditions (<30% RH) Post-rainfall inspection within 24 hours

Regulatory Compliance Standards * Choose compliance requirement ASHRAE 90.1 - Energy Standard for Buildings ASHRAE 189.1 - High Performance Buildings Standard International Building Code (IBC) Chapter 26 AISC Specification for Cold Storage Design NISTIR 92-1 Thermal Performance Guidelines Local Building Code - Moisture Control Insurance Carrier Requirements (FM Global) HACCP for Food Safety Compliance

Sequencing and Schedule Constraints *